Introducing the Easy Petrol Post Driver - the ultimate tool for installing stakes, pegs, and posts on your farm, festival or construction site. With the ability to handle any size post up to 4 inches in diameter, this portable and lightweight tool makes it easy for a single operator to get the job done.
Made in Australia, with a 3-Year Warranty The high impact hammer action beats at 1720 BPM ensuring that posts are driven into the ground quickly and easily on any terrain. The power pack is equipped with the ultra-reliable and compact Honda GX35T 4-stroke engine.
Allowing you to use it all day without operator fatigue the Multi Kit version comes with 3 adapter sizes, wit’s 6 different combinations to choose from. This allows you to easily adapt the post driver to fit your specific needs. Whether you're installing fencing, tree stakes, signage, or something else, this tool is perfect for the job. It's also ideal for use in steep or inaccessible locations, and is physically less demanding than traditional methods.
In addition to the post driver, the kit includes a tough box and fuel can for easy storage and transport, as well as an instruction and servicing manual. Don't waste any more time and energy struggling with traditional post installation methods - upgrade to the Easy Petrol Post Driver today!
The maximum size post that can be driven in is 4” (100mm) diameter.
Our largest adapter is 107mm internal diameter.
When the ground is very dry, compacted or stoney, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot-Bar, or mechanically using either our Pilot Core Tool or a mechanical earth Auger. Posts smaller than 78mm should not need a pilot hole. Ground conditions of Clay or Chalk may also require this method.
To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts; squares / t-shapes etc the outer corners need to be within this capacity.
If you are unsure what adapter are right for you, please contact us for advice specific for your application.
Manufactured and Invented by Christie Engineering of Australia.
European Distribution by SPA Landscaping Ltd trading as Easy Petrol Post Driver
1.0 (1.3HP) at 7,000 rpm
4-stroke, overhead cam
Trigger throttle with integrated stop button Spring isolated hand grips
0.71 L/h at 7,000 rpm
Meets strictest worldwide emission and noise requirements
Starting system Recoil (pull start)
3 Year commmercial warranty
1 Year genuine Honda warranty
105dB - hearing protection required