Tel: +44 (0)114 269 9119

Menu
0

Tel: +44 (0)114 269 9119

0

Your Cart is Empty

Meet our lovely team!

  • Meet our lovely team!

    • Adapter shown with diameter of 32mm depicted
    Adapter image with diameter shown and some instruction
    Post driver being used to install ground anchors in a vineyard
    Ground anchor being installed in a vineyard
    Post Driver being used in a vineyard to install a ground anchor
    Adapter shown with diameter of 32mm depicted
    Adapter image with diameter shown and some instruction
    Post driver being used to install ground anchors in a vineyard
    Ground anchor being installed in a vineyard
    Post Driver being used in a vineyard to install a ground anchor

    32mm Reducing Adapter (2″) from 78 Round

    €100,00

    Size

    This Reducing Adapter has an internal diameter of 32mm round. This Reducer fits inside a 78mm Round Adapter, for driving 1" posts. It is suitable for inserting Ground Anchors, such as Gripple and Platipus.

    The Reducing Adapter slides in and out of the 78mm Round Adapter with rubber O-Rings.

    Compatible with the Classic35 and Classic50 models only.

    What adapter(s) do I need?

    To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts (squares, t-shapes, etc), the outer corners need to be within this capacity.

    If you are unsure which adapter(s) are right for you, please contact us for advice specific to your application.

    What is the maximum ability of the machine?

    The maximum size post that can be driven in is 4” (100mm) diameter. Our largest adapter is 107mm internal diameter. When the ground is very dry, compacted or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot Bar, or mechanically using our Pilot Core Tool add-on. Posts smaller than 78mm should not need a pilot hole. Ground conditions of clay or chalk may also require a pilot hole.

    Easy Fitting

    Straight forward to insert - simply push the Reducing Adapter into the 78mm Round Adapter and use your Post Driver as normal. To remove, insert a thin bar into the holes at the base of the adapter, stand on the bar and pull. Very easy to use, with no bolts or washers to lose.

    You may also like

    Size

    This Reducing Adapter has an internal diameter of 32mm round. This Reducer fits inside a 78mm Round Adapter, for driving 1" posts. It is suitable for inserting Ground Anchors, such as Gripple and Platipus.

    The Reducing Adapter slides in and out of the 78mm Round Adapter with rubber O-Rings.

    Compatible with the Classic35 and Classic50 models only.

    Extra Information

    What adapter(s) do I need?

    To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts (squares, t-shapes, etc), the outer corners need to be within this capacity.

    If you are unsure which adapter(s) are right for you, please contact us for advice specific to your application.

    What is the maximum ability of the machine?

    The maximum size post that can be driven in is 4” (100mm) diameter. Our largest adapter is 107mm internal diameter. When the ground is very dry, compacted or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot Bar, or mechanically using our Pilot Core Tool add-on. Posts smaller than 78mm should not need a pilot hole. Ground conditions of clay or chalk may also require a pilot hole.

    Easy Fitting

    Straight forward to insert - simply push the Reducing Adapter into the 78mm Round Adapter and use your Post Driver as normal. To remove, insert a thin bar into the holes at the base of the adapter, stand on the bar and pull. Very easy to use, with no bolts or washers to lose.