Tel: +44 (0)114 269 9119

Menu
0

Tel: +44 (0)114 269 9119

0

Meet our lovely team!

  • Meet our lovely team!

    • An example adapter for customisation

    Custom Adapter

    Approximate cost: £100-150 - Call to order

    10mm to 107mm Custom Adapter in any shape or profile.
    Get in touch for a free quotation - most post sizes are possible, we just need your post dimensions.

    Priced on application. Typically £100.00 – £250.00 +VAT

    Previously designed for:

    • T-Bar posts
    • Vineyard posts
    • Ground anchors
    • River bank restraints
    • Estate fencing

    Compatible with the Classic35 and Classic50 models only.

    What adapter(s) do I need?

    To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts (squares, t-shapes, etc), the outer corners need to be within this capacity.

    If you are unsure which adapter(s) are right for you, please contact us for advice specific to your application.

    What is the maximum ability of the machine?

    The maximum size post that can be driven in is 4” (100mm) diameter. Our largest adapter is 107mm internal diameter. When the ground is very dry, compacted or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot Bar, or mechanically using our Pilot Core Tool add-on. Posts smaller than 78mm should not need a pilot hole. Ground conditions of clay or chalk may also require a pilot hole.

    Easy Fitting

    Use a 6mm hex key to unscrew the 8 bolts and locking washers. Slide the current Adapter off the base of the Post Driver. Slide the new Adapter into its place and attach using the same bolts and washers. Remember to use a Locking Compound on the screw threads to stop them vibrating out.

    You may also like

    10mm to 107mm Custom Adapter in any shape or profile.
    Get in touch for a free quotation - most post sizes are possible, we just need your post dimensions.

    Priced on application. Typically £100.00 – £250.00 +VAT

    Previously designed for:

    • T-Bar posts
    • Vineyard posts
    • Ground anchors
    • River bank restraints
    • Estate fencing

    Compatible with the Classic35 and Classic50 models only.

    Extra Information

    What adapter(s) do I need?

    To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5-10mm larger than your Post. For shaped posts (squares, t-shapes, etc), the outer corners need to be within this capacity.

    If you are unsure which adapter(s) are right for you, please contact us for advice specific to your application.

    What is the maximum ability of the machine?

    The maximum size post that can be driven in is 4” (100mm) diameter. Our largest adapter is 107mm internal diameter. When the ground is very dry, compacted or stony, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot Bar, or mechanically using our Pilot Core Tool add-on. Posts smaller than 78mm should not need a pilot hole. Ground conditions of clay or chalk may also require a pilot hole.

    Easy Fitting

    Use a 6mm hex key to unscrew the 8 bolts and locking washers. Slide the current Adapter off the base of the Post Driver. Slide the new Adapter into its place and attach using the same bolts and washers. Remember to use a Locking Compound on the screw threads to stop them vibrating out.